DS-3E1105P-EI Hikvision PoE Switch

Product Overview

The DS-3E1105P-EI is a Hikvision poe switch built for CCTV, intercom and network infrastructure deployments.

Key Features

• 4 × 10/100 Mbps PoE port,1 × 10/100 Mbps RJ45 port
• 6 KV surge protection for PoE ports.
• Total PoE Power Budget 60W
• Support 802.1Q VLAN
• Support PoE watchdog to detect and restart the cameras that do not respond
• Support STP/RSTP Loop prevention
• Support cable detection to locate failure
• Up to 300 m Long Range PoE Transmission

--------------------------------------------------------------------------------------

Network Parameters

• Port Number4 × 100 Mbps PoE RJ45 ports, and 1 × 100 Mbps network RJ45 port.
• Port TypeRJ45 port, full duplex, MDI/MDI-X adaptive
• Working ModeStandard mode (default), Extend mode
• StandardIEEE 802.3, IEEE 802.3u, and IEEE 802.3x
• Forwarding ModeStore-and-forward switching
• MAC Address Table2 K
• Internal Cache768 Kbits
• Switching Capacity1 Gbps
• Packet Forwarding Rate0.744 Mpps

Operation Management

• Device MaintenanceSupport remote upgrade, recovering default parameters, viewing logs, configuring basic network parameters.
• Port ConfigurationSupport rate, flow control, and switch configuration

General

• Dimension (W × H × D)105 mm × 27.6 mm × 83.1 mm (4.76” × 3.47” × 1.09”)
• Storage Temperature-40°C to 85°C (-40°F to 185°F)
• Power Source65 W
• Net Weight0.22 kg (0.49 lb)
• Power Consumption In Idle65 W
• ShellMetal material, fan-free design
• Operating Temperature0°C to 40°C (32°F to 104°F)
• Operating Humidity5% to 95% (no condensation)
• Power Supply48 VDC, 1.35 A
• Max. Power Consumption 65 W

Please verify final suitability, finish and firmware compatibility against current manufacturer / distributor listings before publishing.